Skip Nav Destination
ASTM Selected Technical Papers
Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Seventh VolumeAvailable to Purchase
By
DD Janoff,
DD Janoff
1
Lockheed Engineering and Sciences Company NASA Johnson Space Center
, Houston, TX
; symposium chairman and editor
Search for other works by this author on:
WT Royals,
WT Royals
2
United Technologies-Pratt and Whitney
?West Palm Beach, FL
; symposium chairman and editor
Search for other works by this author on:
MV Gunaji
MV Gunaji
3
Allied Signal Technical Services Corporation NASA Johnson Space Center White Sands Test Facility
?Las Cruces, NM
; symposium chairman and editor
Search for other works by this author on:
DD Janoff
1
Lockheed Engineering and Sciences Company NASA Johnson Space Center
, Houston, TX
; symposium chairman and editor
WT Royals
2
United Technologies-Pratt and Whitney
?West Palm Beach, FL
; symposium chairman and editor
MV Gunaji
3
Allied Signal Technical Services Corporation NASA Johnson Space Center White Sands Test Facility
?Las Cruces, NM
; symposium chairman and editor
ASTM International
Volume:
STP1267-EB
ISBN electronic:
978-0-8031-5314-1
ISBN-10:
0-8031-2004-4
ISBN print:
978-0-8031-2004-4
No. of Pages:
282
Publication date:
1995
Book Chapter
Promoted Combustion of Pure Metals in Oxygen-Enriched Atmospheres Available to Purchase
By
S Sircar
,
S Sircar
1
Materials Scientist
, Corporate Research and Development, Reynolds Metals Company
, Fourth and Canal Streets, Richmond, VA23219
.
Search for other works by this author on:
J Stoltzfus
,
J Stoltzfus
2
Aerospace Engineer
, NASA Laboratories Office, White Sands Test Facility
, P.O. Drawer MM, Las Cruces, NM88004
.
Search for other works by this author on:
C Bryan
,
C Bryan
3
Materials Scientist
, Mail Code DM-MSL-22, NASA Kennedy Space Center
, FL32899
.
Search for other works by this author on:
J Kazaroff
J Kazaroff
4
Materials Scientist
, NASA Lewis Research Center
, 21000 Brookpark Road, Cleveland, OH44135
.
Search for other works by this author on:
Page Count:
7
-
Published:1995
Citation
S Sircar, J Stoltzfus, C Bryan, J Kazaroff, 1995. "Promoted Combustion of Pure Metals in Oxygen-Enriched Atmospheres", Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Seventh Volume, DD Janoff, WT Royals, MV Gunaji
Download citation file:
The combustion behavior of several elemental materials was studied using their threshold pressures (minimum pressure required to sustain combustion in 3.2-mm-(0.13-inch) diameter rod) as the ranking criterion in a promoted combustion test apparatus. Test media varied from 100% aviator's breathing oxygen to air and the test pressures varied from ambient to 70 MPa (10,000 psi).
This content is only available via PDF.
You do not currently have access to this chapter.
Sign in
Don't already have an account? Register
Client Account
You could not be signed in. Please check your email address / username and password and try again.
Could not validate captcha. Please try again.
Sign in via your Institution
Sign in via your InstitutionEmail alerts
Related Chapters
An Assessment of the Metals Flammability Hazard in the Kennedy Space Center Oxygen Systems
Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fifth Volume
Combustion of 316 Stainless Steel in High-Pressure Gaseous Oxygen
Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Fourth Volume
An Assessment of the Flammability Hazard of Several Corrosion Resistant Metal Alloys
Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Sixth Volume
Configurational Effects on the Combustion of Several Alloy Systems in Oxygen-Enriched Atmospheres
Flammability and Sensitivity of Materials in Oxygen-Enriched Atmospheres: Eighth Volume
Related Articles
Determination of Burn Criterion for Promoted Combustion Testing
J. ASTM Int. (November,2009)
Promoted Combustion Testing of Pure and Ceramic-Coated Metals in High Pressure Oxygen by the Federal Institute of Materials Research and Testing (BAM)
J. ASTM Int. (April,2006)
Analysis Tools Used to Evaluate Oxygen Hazards and the Oxygen Compatibility of Metals
J. ASTM Int. (May,2006)
Keynote—Materials Selection for Oxidizer Service—Successes and Challenges
J. ASTM Int. (November,2009)
