Skip Nav Destination
ASTM Selected Technical Papers
Compression Response of Composite StructuresAvailable to Purchase
By
SE Groves,
SE Groves
1
Lawrence Livermore National Laboratory
, Livermore, CA
; symposium chairman and editor
Search for other works by this author on:
AL Highsmith
AL Highsmith
2
University of Alabama
, Tuscaloosa, AL
; symposium co-chairman and editor
Search for other works by this author on:
SE Groves
1
Lawrence Livermore National Laboratory
, Livermore, CA
; symposium chairman and editor
AL Highsmith
2
University of Alabama
, Tuscaloosa, AL
; symposium co-chairman and editor
ASTM International
Volume:
STP1185-EB
ISBN electronic:
978-0-8031-5264-9
ISBN-10:
0-8031-1499-0
ISBN print:
978-0-8031-1499-9
No. of Pages:
372
Publication date:
1994
Compression Response of Composite Structures
By: SE Groves, AL Highsmith
https://doi.org/10.1520/STP1185-EB
ISBN-10: 0-8031-1499-0
ISBN (print): 978-0-8031-1499-9
ISBN (electronic): 978-0-8031-5264-9
Publisher: ASTM International
Published: 1994
Download citation file:
Table of Contents
-
OverviewBySE Groves,SE Groves1Lawrence Livermore National Laboratory,Livermore, CA;symposium chairman and editorSearch for other works by this author on:AL HighsmithAL Highsmith2University of Alabama,Tuscaloosa, AL;symposium co-chairman and editorSearch for other works by this author on:
-
Stability Analysis of Thick-Section Composite Cylinders Under Hydrostatic Pressure Including Three-Dimensional Effects and Nonlinear Material ResponseByDL BonanniDL Bonanni1Mechanical engineer, Survivability, Structures, and Materials Directorate, Carderock Division,Naval Surface Warfare Center (formerly David Taylor Research Center), Code 65.2,Bethesda, MD20084-5000.Search for other works by this author on:
-
Application of a New Micromechanics-Based Homogenization Technique for Nonlinear Compression of Thick-Section LaminatesByDA Pecknold,DA Pecknold1Professor, Department of Civil Engineering,University of Illinois at Urbana-Champaign,Urbana,IL61801.Search for other works by this author on:S RahmanS Rahman2Formerlygraduate research assistant, Department of Civil Engineering,University of Illinois at Urbana-Champaign,Urbana, IL61801.Search for other works by this author on:
-
Creep Buckling of Asymmetric Laminated Beam ColumnsByAM VinogradovAM Vinogradov1Associate professor, Department of Mechanical Engineering,Montana State University,Bozeman, MT59717.Search for other works by this author on:
-
Effects of Layer Waviness on the Compression Response of LaminatesByDO Adams,DO Adams1Assistant professor, Aerospace Engineering and Engineering Mechanics Dept.,Iowa State University,Ames, IA50011.Search for other works by this author on:MW HyerMW Hyer2Professor, Engineering Science and Mechanics Dept.,Virginia Polytechnic Institute and State University,Blacksburg, VA24061.Search for other works by this author on:
-
Effects of Layer Waviness on the Stresses and Failure in Hydrostatically Loaded CylindersByTL Brown,TL Brown1Graduate research assistant, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061-0219.Search for other works by this author on:MW HyerMW Hyer2Professor, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061-021.Search for other works by this author on:
-
Design, Analysis, and Hydrotesting of a Composite-Aluminum Cylinder Joint for Pressure-Hull ApplicationsBySM Andersen,SM Andersen1Graduate student of mechanical engineering and associate director/research associate professor of mechanical engineering, respectively,Center for Composite Materials and Department of Mechanical Engineering, University of Delaware,Newark, DE19716.Search for other works by this author on:JW Gillespie, Jr,JW Gillespie, Jr1Graduate student of mechanical engineering and associate director/research associate professor of mechanical engineering, respectively,Center for Composite Materials and Department of Mechanical Engineering, University of Delaware,Newark, DE19716.Search for other works by this author on:MA Lamontia,MA Lamontia2DuPont-Advanced Material Systems,Delaware Technology Park, P.O. Box 6107,Newark, DE19714-6107.Search for other works by this author on:BD Olson,BD Olson2DuPont-Advanced Material Systems,Delaware Technology Park, P.O. Box 6107,Newark, DE19714-6107.Search for other works by this author on:JG Sloan,JG Sloan2DuPont-Advanced Material Systems,Delaware Technology Park, P.O. Box 6107,Newark, DE19714-6107.Search for other works by this author on:KE Newan,KE Newan2DuPont-Advanced Material Systems,Delaware Technology Park, P.O. Box 6107,Newark, DE19714-6107.Search for other works by this author on:GKA KodokianGKA Kodokian2DuPont-Advanced Material Systems,Delaware Technology Park, P.O. Box 6107,Newark, DE19714-6107.Search for other works by this author on:
-
A Shear Deflection Theory for Analysis of End Plugs for External Pressure Tests of Composite CylindersByHW Blake,HW Blake1Senior development staff member and development staff member, respectively,Oak Ridge National Laboratory, Martin Marietta Energy Systems Inc., P.O. Box 2003,Oak Ridge, TN37831-7294.Search for other works by this author on:JM StarbuckJM Starbuck1Senior development staff member and development staff member, respectively,Oak Ridge National Laboratory, Martin Marietta Energy Systems Inc., P.O. Box 2003,Oak Ridge, TN37831-7294.Search for other works by this author on:
-
The Effect of Assembly Fit-Up Gaps on the Compression Response of Thick-Section Carbon/Epoxy CompositesByET Camponeschi, Jr,ET Camponeschi, Jr1Senior project engineer,CARDEROCKDIV, NSWC,Annapolis, MD.Search for other works by this author on:RE Bohlmann,RE Bohlmann2Senior technical specialist,McDonnell Aircraft Co.,St. Louis, MO.Search for other works by this author on:J Hall,J Hall3Engineering specialist,General Dynamics, EB Division,New London, CT.Search for other works by this author on:TT CarrTT Carr4Ensign,United States Navy,Annapolis, MD.Search for other works by this author on:
-
Failure of Thick Composite Cylinders Subjected to External Hydrostatic PressureByJM Starbuck,JM Starbuck1Development staff member and Senior Development staff member, respectively,Oak Ridge National Laboratory, Martin Marietta Energy Systems, Inc., PO Box 2003,Oak Ridge, TN37831-7294.Search for other works by this author on:HW BlakeHW Blake1Development staff member and Senior Development staff member, respectively,Oak Ridge National Laboratory, Martin Marietta Energy Systems, Inc., PO Box 2003,Oak Ridge, TN37831-7294.Search for other works by this author on:
-
The Effects of Constituent Properties on the Compression Strength of Advanced CompositesByAS Crasto,AS Crasto1Materials engineer and senior research engineer, respectively,University of Dayton Research Institute,300 College Park Ave., Dayton, OH45469-0168.Search for other works by this author on:RY KimRY Kim1Materials engineer and senior research engineer, respectively,University of Dayton Research Institute,300 College Park Ave., Dayton, OH45469-0168.Search for other works by this author on:
-
Experiments to Reveal the Role of Matrix Properties and Composite Microstructure in Longitudinal Compression StrengthBySW Yurgartis,SW Yurgartis1Associate professor,Mechanical and Aeronautical Engineering, Clarkson University,Potsdam, NY13699-5729.Search for other works by this author on:SS SternsteinSS Sternstein2Professor,Materials Engineering, Rensselaer Polytechnic Institute,Troy, NY12180.Search for other works by this author on:
-
The Role of Fiber, Matrix, and Interphase in the Compressive Static and Fatigue Behavior of Polymeric Matrix Composite LaminatesByRE Swain,RE Swain1Senior technology development engineer,Smith & Nephew Richards Inc.,Memphis, TN38116.Search for other works by this author on:JS Elmore,JS Elmore2Graduate research assistant, senior graduate research assistant, and Alexander Giacco professor of Engineering Science and Mechanics, respectively, Materials Response Group, Dept. of Engineering Science and Mechanics,Virginia Tech,Blacksburg, VA24061-0219.Search for other works by this author on:JJ Lesko,JJ Lesko2Graduate research assistant, senior graduate research assistant, and Alexander Giacco professor of Engineering Science and Mechanics, respectively, Materials Response Group, Dept. of Engineering Science and Mechanics,Virginia Tech,Blacksburg, VA24061-0219.Search for other works by this author on:KL ReifsniderKL Reifsnider2Graduate research assistant, senior graduate research assistant, and Alexander Giacco professor of Engineering Science and Mechanics, respectively, Materials Response Group, Dept. of Engineering Science and Mechanics,Virginia Tech,Blacksburg, VA24061-0219.Search for other works by this author on:
-
A Global and Local Investigation of Compressive Strength to Determine the Influence of the Fiber/Matrix InterphaseByJJ Lesko,JJ Lesko1Graduate research assistant, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061.Search for other works by this author on:JS Elmore,JS Elmore1Graduate research assistant, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061.Search for other works by this author on:SW Case,SW Case1Graduate research assistant, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061.Search for other works by this author on:RE Swain,RE Swain2Senior research engineer,Smith and Nephew Richards Inc.,Memphis, TN38116.Search for other works by this author on:KL Reifsnider,KL Reifsnider3Alexander Giacco professor and assistant professor, respectively, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061.Search for other works by this author on:DA DillardDA Dillard3Alexander Giacco professor and assistant professor, respectively, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061.Search for other works by this author on:
-
Compression Response of a Fatigue-Loaded Composite Hip ProsthesisByK Liao,K Liao1Graduate student and Alexander Giacco professor, respectively, Materials Response Group, Engineering Science and Mechanics Department,Virginia Polytechnic Institute and State University,Blacksburg, VA24061-0219.Search for other works by this author on:SS Lee,SS Lee2Formerly research associate, Materials Response Group, Engineering Science and Mechanics Department, Virginia Polytechnic Institute and State University, presently with the Materials Behavior Branch, Metals and Ceramics Division,Wright Patterson Air Force Base,OH45433-6533.Search for other works by this author on:KL ReifsniderKL Reifsnider1Graduate student and Alexander Giacco professor, respectively, Materials Response Group, Engineering Science and Mechanics Department,Virginia Polytechnic Institute and State University,Blacksburg, VA24061-0219.Search for other works by this author on:
-
Compression-Compression Fatigue of a Stitched Uniwoven Graphite/Epoxy CompositeByNE Vandermey,NE Vandermey1Aerospace engineer,U.S. Air Force, PL/OLAC/SXDT, Phillips Laboratory EdwardsAFB, CA93523.Search for other works by this author on:JE Masters,JE Masters2Staff engineer,Lockheed Engineering and Science Co.,144 Research Dr., Hampton, VA23666.Search for other works by this author on:CC Poe,CC Poe3Senior research scientist,NASA Langley Research Center, Mail Stop 188E,NASA Langley Research Center,Hampton, VA23681.Search for other works by this author on:DH MorrisDH Morris4Professor and assistant department head, Department of Engineering and Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061-0219.Search for other works by this author on:
-
Compressive Static and Fatigue Loading of Continuous Fiber-Reinforced CompositesByK SchulteK Schulte1Technical University Hamburg-Harburg,21071Hamburg,.GermanySearch for other works by this author on:
-
Composite Compressive Strength Prediction Using a Nonhomogeneous Foundation ModelByYL Xu,YL Xu1Research associate and Alexander Giacco professor, respectively, Dept. of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061.Search for other works by this author on:KL ReifsniderKL Reifsnider1Research associate and Alexander Giacco professor, respectively, Dept. of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, VA24061.Search for other works by this author on:
-
An Extrapolation Method for the Evaluation of Compression Strength of Laminated CompositesBySC Tan,SC Tan1President,Wright Materials Research Co., P.O. Box 31667,Dayton, OH45437.Search for other works by this author on:M KnightM Knight2Materials research engineer (retired),Wright Laboratories, Wright Patterson Air Force Base, WL/MLBM,Dayton, OH45433-6533.Search for other works by this author on:
-
Analysis of a Miniature Sandwich Compression SpecimenByRY Kim,RY Kim1Senior research engineer and research engineer, respectively,University of Dayton Research Institute,Dayton, OH45469-0168.Search for other works by this author on:AS Crasto,AS Crasto1Senior research engineer and research engineer, respectively,University of Dayton Research Institute,Dayton, OH45469-0168.Search for other works by this author on:YJ YumYJ Yum2Associate professor,Ulsan University,Kyungnam,.KoreaSearch for other works by this author on:
-
Failure Criteria and Damage Mechanisms of G-10 Woven Laminates with Cutouts Under Biaxial Compressive DeformationByJZ Wang,JZ Wang1Research assistant and professor, respectively, Dept. of Mechanical Engineering,UIUC,Urbana, IL61801.Search for other works by this author on:DF SocieDF Socie1Research assistant and professor, respectively, Dept. of Mechanical Engineering,UIUC,Urbana, IL61801.Search for other works by this author on:
