Skip Nav Destination
ASTM Selected Technical Papers
Flaw Growth and FractureAvailable to Purchase
By
JM Barsom
JM Barsom
1
United States Steel Corporation Research Laboratory
, Monroeville, Pa.
; symposium chairman
.
Search for other works by this author on:
JM Barsom
1
United States Steel Corporation Research Laboratory
, Monroeville, Pa.
; symposium chairman
.ASTM International
Volume:
STP631-EB
ISBN electronic:
978-0-8031-4703-4
ISBN-10:
0-8031-0356-5
ISBN print:
978-0-8031-0356-6
No. of Pages:
531
Publication date:
1977
Flaw Growth and Fracture
By: JM Barsom
https://doi.org/10.1520/STP631-EB
ISBN-10: 0-8031-0356-5
ISBN (print): 978-0-8031-0356-6
ISBN (electronic): 978-0-8031-4703-4
Publisher: ASTM International
Published: 1977
Download citation file:
Table of Contents
-
IntroductionByJM BarsomJM Barsom1United States Steel Corporation Research Laboratory,Monroeville, Pa.;symposium chairman.Search for other works by this author on:
-
Fracture Mechanics in the Elastic-Plastic RegimeByPC ParisPC Paris1Professor of mechanics,Washington University,St. Louis, Mo.63130.Search for other works by this author on:
-
Path Dependence of the J-Integral and the Role of J as a Parameter Characterizing the Near-Tip FieldByRM McMeekingRM McMeeking1acting assistant professor,Division of Applied Mechanics, Stanford University,Stanford, Calif.94305.Search for other works by this author on:
-
Fracture Analysis Under Large-Scale Plastic Yielding: A Finite Deformation, Embedded Singularity, Elastoplastic Incremental Finite-Element SolutionBySN Atluri,SN Atluri1Professor, postdoctoral fellow, and graduate student, respectively,School of Engineering Science and Mechanics, Georgia Institute of Technology,Atlanta, Ga.30332.Search for other works by this author on:M Nakagaki,M Nakagaki1Professor, postdoctoral fellow, and graduate student, respectively,School of Engineering Science and Mechanics, Georgia Institute of Technology,Atlanta, Ga.30332.Search for other works by this author on:W-H ChenW-H Chen1Professor, postdoctoral fellow, and graduate student, respectively,School of Engineering Science and Mechanics, Georgia Institute of Technology,Atlanta, Ga.30332.Search for other works by this author on:
-
Comparison of Compliance and Estimation Procedures for Calculating J-Integral ValuesByJP Hickerson, JrJP Hickerson, Jr1Member of the technical staff,Physical Metallurgy Division 5835, Sandia Laboratories,Albuquerque, N. M.87115.Search for other works by this author on:
-
Evaluation of the Toughness of Thick Medium-Strength Steels by Using Linear-Elastic Fracture Mechanics and Correlations Between KIc and Charpy V-NotchByB Marandet,B Marandet1Institut de Recherches de la Sidérurgie Francaise,Saint Germain En Laye,.FranceSearch for other works by this author on:G SanzG Sanz1Institut de Recherches de la Sidérurgie Francaise,Saint Germain En Laye,.FranceSearch for other works by this author on:
-
Correlation Between the Fatigue-Crack Initiation at the Root of a Notch and Low-Cycle Fatigue DataByA Baus,A Baus1Institut de Recherches de la Sidérurgie Francaise,Saint Germain en Laye,.FranceSearch for other works by this author on:HP Lieurade,HP Lieurade1Institut de Recherches de la Sidérurgie Francaise,Saint Germain en Laye,.FranceSearch for other works by this author on:G Sanz,G Sanz1Institut de Recherches de la Sidérurgie Francaise,Saint Germain en Laye,.FranceSearch for other works by this author on:M TruchonM Truchon1Institut de Recherches de la Sidérurgie Francaise,Saint Germain en Laye,.FranceSearch for other works by this author on:
-
Ductile Rupture Blunt-Notch Fracture CriterionByJA Begley,JA Begley1Mechanics Department, Westinghouse Research Laboratories,Pittsburgh, Pa.15235; J. A. Begley is nowprofessor, Department of Metallurgical Engineering,Ohio State University,Columbus, Ohio43210.Search for other works by this author on:WA Logsdon,WA Logsdon1Mechanics Department, Westinghouse Research Laboratories,Pittsburgh, Pa.15235; J. A. Begley is nowprofessor, Department of Metallurgical Engineering,Ohio State University,Columbus, Ohio43210.Search for other works by this author on:JD LandesJD Landes1Mechanics Department, Westinghouse Research Laboratories,Pittsburgh, Pa.15235; J. A. Begley is nowprofessor, Department of Metallurgical Engineering,Ohio State University,Columbus, Ohio43210.Search for other works by this author on:
-
Stress-Corrosion Crack Initiation in High-Strength Type 4340 SteelByWG Clark, JrWG Clark, Jr1Fellow engineer,Mechanics Department, Westinghouse Research Laboratories,Pittsburgh, Pa.15235.Search for other works by this author on:
-
Fatigue-Crack Growth Rate Testing at High Stress IntensitiesByNE DowlingNE Dowling1Senior engineer,Westinghouse Research Laboratories,Pittsburgh, Pa.15235.Search for other works by this author on:
-
Fatigue-Crack Propagation in Electroslag WeldmentsByBM Kapadia,BM Kapadia1Associate research consultant and research technician, respectively,U.S. Steel Corporation, Research Laboratory,Monroeville, Pa.15146.Search for other works by this author on:EJ Imhof, JrEJ Imhof, Jr1Associate research consultant and research technician, respectively,U.S. Steel Corporation, Research Laboratory,Monroeville, Pa.15146.Search for other works by this author on:
-
Fatigue Growth of Surface CracksByTA Cruse,TA Cruse1Project engineer, analytical engineer, and assistant project engineer, respectively,Pratt & Whitney Aircraft Division, United Technologies Corporation,East Hartford, Conn.06108.Search for other works by this author on:GJ Meyers,GJ Meyers1Project engineer, analytical engineer, and assistant project engineer, respectively,Pratt & Whitney Aircraft Division, United Technologies Corporation,East Hartford, Conn.06108.Search for other works by this author on:RB WilsonRB Wilson1Project engineer, analytical engineer, and assistant project engineer, respectively,Pratt & Whitney Aircraft Division, United Technologies Corporation,East Hartford, Conn.06108.Search for other works by this author on:
-
Stress Intensities for Cracks Emanating from Pin-Loaded HolesByCW Smith,CW Smith1Professor, lecturer, and graduate research assistant, respectively, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, Va.24061.Search for other works by this author on:M Jolles,M Jolles1Professor, lecturer, and graduate research assistant, respectively, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, Va.24061.Search for other works by this author on:WH PetersWH Peters1Professor, lecturer, and graduate research assistant, respectively, Department of Engineering Science and Mechanics,Virginia Polytechnic Institute and State University,Blacksburg, Va.24061.Search for other works by this author on:
-
Dependence of JIc on the Mechanical Properties of Ductile MaterialsByJ Lanteigne,J Lanteigne1Graduate student, assistant research professor, and research professor, respectively,Department of Metallurgical Engineering, Ecole Polytechnique,Montreal, Quebec,.CanadaSearch for other works by this author on:MN Bassim,MN Bassim1Graduate student, assistant research professor, and research professor, respectively,Department of Metallurgical Engineering, Ecole Polytechnique,Montreal, Quebec,.CanadaSearch for other works by this author on:DR HayDR Hay1Graduate student, assistant research professor, and research professor, respectively,Department of Metallurgical Engineering, Ecole Polytechnique,Montreal, Quebec,.CanadaSearch for other works by this author on:
-
Effect of Specimen Size on J-Integral and Stress-Intensity Factor at the Onset of Crack ExtensionByHP Keller,HP Keller1Research engineer and division head, respectively,Deutsche Forschungs-und Versuchsanstalt für Luft-und Raumfahrt,Cologne,.GermanySearch for other works by this author on:D MunzD Munz1Research engineer and division head, respectively,Deutsche Forschungs-und Versuchsanstalt für Luft-und Raumfahrt,Cologne,.GermanySearch for other works by this author on:
-
Determination of Stress Intensities of Through-Cracks in a Plate Structure Under Uncertain Boundary Conditions by Means of Strain GagesByH Kitagawa,H Kitagawa1Professor and graduate student, respectively,Tokyo University,Tokyo,.JapanSearch for other works by this author on:H IshikawaH Ishikawa1Professor and graduate student, respectively,Tokyo University,Tokyo,.JapanSearch for other works by this author on:
-
Determination of R-Curves for Structural Materials Using Nonlinear Mechanics MethodsByDE McCabeDE McCabe1Senior engineer,Westinghouse Electric Corporation, Research and Development,Pittsburgh, Pa.15235.Search for other works by this author on:
-
Fracture Behavior of Bridge SteelsByR Roberts,R Roberts1Professor of Mechanical Engineering and Mechanics,Lehigh University, Materials Research Center,Bethlehem, Pa.18015.Search for other works by this author on:GV Krishna,GV Krishna2Senior engineer,Cryogenic Systems Division, Air Products and Chemicals, Inc.,Allentown, Pa.18105.Search for other works by this author on:GR IrwinGR Irwin3Visiting professor, Mechanical Engineering Department,University of Maryland,College Park, Md.20742.Search for other works by this author on:
-
Fracture Characteristics of Plain and Welded 3-In.-Thick Aluminum Alloy Plate at Various TemperaturesByFG Nelson,FG Nelson1Senior engineers,Engineering Properties and Design Division, Alcoa Laboratories,Alcoa Center, Pa.15069.Search for other works by this author on:DJ BrownhillDJ Brownhill1Senior engineers,Engineering Properties and Design Division, Alcoa Laboratories,Alcoa Center, Pa.15069.Search for other works by this author on:
-
Fracture Toughness of Random Glass Fiber Epoxy Composites: An Experimental InvestigationByS Gaggar,S Gaggar1Research Associate and professor of materials engineering, respectively,Illinois Institute of Technology,Chicago, Ill.60616Search for other works by this author on:LJ BroutmanLJ Broutman1Research Associate and professor of materials engineering, respectively,Illinois Institute of Technology,Chicago, Ill.60616Search for other works by this author on:
-
Effect of Cold Working on KIscc in a 4340 SteelByWG Clark, JrWG Clark, Jr1Fellow engineer,Mechanics Department, Westinghouse Research Laboratories,Pittsburgh, Pa.15235.Search for other works by this author on:
-
Corrosion Fatigue Properties of Ti-6Al-6V-2Sn (STOA)ByWE Krupp,WE Krupp1Group engineer, research scientist, and research scientist, respectively,Lockheed-California Company, Rye Canyon Research Laboratory,Valencia, Calif.Search for other works by this author on:JT Ryder,JT Ryder1Group engineer, research scientist, and research scientist, respectively,Lockheed-California Company, Rye Canyon Research Laboratory,Valencia, Calif.Search for other works by this author on:DE Pettit,DE Pettit1Group engineer, research scientist, and research scientist, respectively,Lockheed-California Company, Rye Canyon Research Laboratory,Valencia, Calif.Search for other works by this author on:DW HoeppnerDW Hoeppner2Professor of Engineering,University of Missouri,Columbia, Mo.Search for other works by this author on:
-
Effect of Thickness on Retardation Behavior of 7075 and 2024 Aluminum AlloysByGR ChananiGR Chanani1Engineering specialist,Metallics Research Department, Northrop Corporation,Hawthorne, Calif.90250.Search for other works by this author on:
-
Spectrum Loading—A Useful Tool to Screen Effects of Microstructure on Fatigue Crack-Growth ResistanceByRJ BucciRJ Bucci1Staff engineer,Engineering Properties and Design Division, Aluminum Company of America, Alcoa Laboratories,Alcoa Center, Pa.15069.Search for other works by this author on:
-
Fatigue-Crack Propagation Through a Measured Residual Stress Field in Alloy SteelByJH Underwood,JH Underwood1Research engineer,Materials Engineering Division, U.S. Army, Benet Weapons Laboratory,Watervliet, N.Y.12189.Search for other works by this author on:LP Pook,LP Pook2Principal scientific officer and higher scientific officer, respectively,National Engineering Laboratory,East Kilbride, Glasgow,.ScotlandSearch for other works by this author on:JK SharplesJK Sharples2Principal scientific officer and higher scientific officer, respectively,National Engineering Laboratory,East Kilbride, Glasgow,.ScotlandSearch for other works by this author on:
-
Automated Design of Stiffened Panels Against Crack Growth and Fracture Among Other Design ConstraintsByCS DavisCS Davis1Assistant professor,School of Engineering, University of New Orleans,New Orleans, La.70122andconsultantFracture Control, Martin Marietta Aerospace, Michoud Operations,New Orleans, La.70189.Search for other works by this author on:
-
Evaluation of Current Procedures for Dynamic Fracture-Toughness TestingByWL Server,WL Server1Vice president, president, and manager of Testing Services, respectively,Fracture Control Corporation,Goleta, Calif.93017.Search for other works by this author on:RA Wullaert,RA Wullaert1Vice president, president, and manager of Testing Services, respectively,Fracture Control Corporation,Goleta, Calif.93017.Search for other works by this author on:JW SheckherdJW Sheckherd1Vice president, president, and manager of Testing Services, respectively,Fracture Control Corporation,Goleta, Calif.93017.Search for other works by this author on:
-
Experimental Verification of the JIc and Equivalent Energy Methods for the Evaluation of the Fracture Toughness of SteelsByB Marandet,B Marandet1Research engineer and head of Steels Properties Group, respectively,Institut de Recherches de la Sidérurgie Francaise,Saint Germain en Laye,.FranceSearch for other works by this author on:G SanzG Sanz1Research engineer and head of Steels Properties Group, respectively,Institut de Recherches de la Sidérurgie Francaise,Saint Germain en Laye,.FranceSearch for other works by this author on:
-
Dynamic Fracture Toughness of SA533 Grade A Class 2 Base Plate and WeldmentsByWA Logsdon,WA Logsdon1Mechanics Department, Westinghouse Research Laboratories,Pittsburgh, Pa.15235; J. A. Begley is presently aprofessoratThe Ohio State University, Department of Metallurgical Engineering,Columbus, Ohio.Search for other works by this author on:JA BegleyJA Begley1Mechanics Department, Westinghouse Research Laboratories,Pittsburgh, Pa.15235; J. A. Begley is presently aprofessoratThe Ohio State University, Department of Metallurgical Engineering,Columbus, Ohio.Search for other works by this author on:
-
Prediction of Fracture Toughness KIc of 2¼Cr-1Mo Pressure Steels from Charpy V-Notch Test ResultsByT Iwadate,T Iwadate1Research engineers and general manager, respectively,Research Laboratory, Muroran Plant, The Japan Steel Works,Muroran,.Japan051Search for other works by this author on:T Karaushi,T Karaushi1Research engineers and general manager, respectively,Research Laboratory, Muroran Plant, The Japan Steel Works,Muroran,.Japan051Search for other works by this author on:J WatanabeJ Watanabe1Research engineers and general manager, respectively,Research Laboratory, Muroran Plant, The Japan Steel Works,Muroran,.Japan051Search for other works by this author on:
-
Analysis of Stable and Catastrophic Crack Growth Under Rising LoadBySR VaranasiSR Varanasi1Specialist engineer,Stress and Fatigue Research, Boeing Commerical Airplane Company,Seattle, Wash.98124.Search for other works by this author on:
