Skip Nav Destination
Issues
Research Papers
Wear Scar Prediction Based on Wear Simulator Input Data—A Preliminary Artificial Neural Network Approach
J. ASTM Int. (October 2006) 3 (9): 1–8.
https://doi.org/10.1520/JAI100249
A Tracer Method to Determine Extremely Low Wear Rates of Ultrahigh Molecular Weight Polyethylene
J. ASTM Int. (October 2006) 3 (9): 1–6.
https://doi.org/10.1520/JAI100253
Evaluating Methods for Water Vapor Transmission of Moisture Vapor Suppression Coatings on Concrete
J. ASTM Int. (October 2006) 3 (9): 1–8.
https://doi.org/10.1520/JAI100256
Geometry and Data Reduction Recommendations for a Standardized End Notched Flexure Test for Unidirectional Composites
J. ASTM Int. (October 2006) 3 (9): 1–19.
https://doi.org/10.1520/JAI100285
Passing Ability Tester for Self-Consolidating Concrete
J. ASTM Int. (October 2006) 3 (9): 1–12.
https://doi.org/10.1520/JAI100330
Reactor Dosimetry Study of the Rhode Island Nuclear Science Center
J. ASTM Int. (October 2006) 3 (9): 1–8.
https://doi.org/10.1520/JAI100341
Characterization of Modified Carbon Nanotubes by TG-MS and Pyrolysis-GC/MS
J. ASTM Int. (October 2006) 3 (9): 1–8.
https://doi.org/10.1520/JAI100351
The Validity of the Use of Equivalent DIDO Nickel Dose for Graphite Dosimetry
J. ASTM Int. (October 2006) 3 (9): 1–9.
https://doi.org/10.1520/JAI100363
Thermoelastic Transformation Behavior of Nitinol
J. ASTM Int. (October 2006) 3 (9): 1–10.
https://doi.org/10.1520/JAI100374
A New Methodology for Adjustment of Iron Scattering Cross Sections Using Time-of-Flight Spectroscopy
J. ASTM Int. (October 2006) 3 (9): 1–7.
https://doi.org/10.1520/JAI100377
Experimental Studies of NiTi Self-expanding Stent Designs
J. ASTM Int. (October 2006) 3 (9): 1–12.
https://doi.org/10.1520/JAI100388
Verification of Strain Level Calculations in Nitinol Fatigue Resistance Predictions
J. ASTM Int. (October 2006) 3 (9): 1–8.
https://doi.org/10.1520/JAI100391
Impact of Adjuvants on Droplet Spreading and Droplet Deposit Area After Spray Application
J. ASTM Int. (October 2006) 3 (9): 1–9.
https://doi.org/10.1520/JAI100392
The Development of an Austenitic Stainless Steel Bearing with High Corrosion Resistance and High Nonmagnetic Property
J. ASTM Int. (October 2006) 3 (9): 1–7.
https://doi.org/10.1520/JAI100424
Experiences in Using Ultrasonic Testing of Bearing Steel for Demanding Applications
J. ASTM Int. (October 2006) 3 (9): 1–7.
https://doi.org/10.1520/JAI100425
Basics of Polymeric Scaffolds for Tissue Engineering
J. ASTM Int. (October 2006) 3 (9): 1–10.
https://doi.org/10.1520/JAI100428
Effect of Aggregate Particle Size on Determining Alkali-Silica Reactivity by Accelerated Tests
J. ASTM Int. (October 2006) 3 (9): 1–11.
https://doi.org/10.1520/JAI100432
Realistic Approach for Enhancing Reliability of Pavement Surface Friction Testing
J. ASTM Int. (October 2006) 3 (9): 1–8.
https://doi.org/10.1520/JAI100486
The Effects of Load Soak Control on the Wear of UHMWPE at Various Hydration Levels in a Joint Simulation Study
J. ASTM Int. (October 2006) 3 (9): 1–5.
https://doi.org/10.1520/JAI100496
Finite Element Simulation of Dynamic Crack Propagation for Complex Geometries Without Remeshing
J. ASTM Int. (October 2006) 3 (9): 1–16.
https://doi.org/10.1520/JAI13218
Coupled Neutron-Gamma Calculations for the LR-0 Experimental Benchmark
J. ASTM Int. (October 2006) 3 (9): 1–7.
https://doi.org/10.1520/JAI13426
Flow Friction Fire History and Research
J. ASTM Int. (October 2006) 3 (9): 1–12.
https://doi.org/10.1520/JAI13543
Ignition of Metals at High Temperatures in Oxygen
J. ASTM Int. (October 2006) 3 (9): 1–18.
https://doi.org/10.1520/JAI13561
Proactive Mitigation of PCTFE-Related Ignition Hazards in Oxygen Systems: II. Testing of Inventoried “At-Risk” PCTFE Parts and Hazard Analyses of Corresponding Ground Service Equipment at the Kennedy Space Center
JM Waller, KA Murray, AR Staveland, PD Faughnan, D Tyre, SR Smith, T Gallus, BE Newton, FY Hshieh, HD Beeson
J. ASTM Int. (October 2006) 3 (9): 1–12.
https://doi.org/10.1520/JAI13568
Comparison of the Life Cycle Assessments of an Insulating Concrete Form House and a Wood Frame House
J. ASTM Int. (October 2006) 3 (9): 1–11.
https://doi.org/10.1520/JAI13637
Greening of Mortars with Pozzolans
J. ASTM Int. (October 2006) 3 (9): 1–9.
https://doi.org/10.1520/JAI13648
Rapid Evaluation of Inclusions in Bearing Steel
J. ASTM Int. (October 2006) 3 (9): 1–6.
https://doi.org/10.1520/JAI14036
Influence of Steel Making and Further Processing on the Distortion of Bearing Steel Components
J. ASTM Int. (October 2006) 3 (9): 1–11.
https://doi.org/10.1520/JAI14042
