Skip Nav Destination
Issues
Research Papers
Retrieval Analysis of Total Disc Replacements: Implications for Standardized Wear Testing
J. ASTM Int. (June 2006) 3 (6): 1–12.
https://doi.org/10.1520/JAI100252
Application of the Normalization Method to Dynamic Fracture Toughness Testing of Alloy 718
J. ASTM Int. (June 2006) 3 (6): 1–14.
https://doi.org/10.1520/JAI100337
Elastic T-Stress Solutions of Embedded Elliptical Cracks Subjected to Uniaxial and Biaxial Loadings
J. ASTM Int. (June 2006) 3 (6): 1–14.
https://doi.org/10.1520/JAI100347
Calculation of Neutron Fluxes for Radioactive Inventory Assessment of Magnox Power Plant
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI100364
Functional Properties of Nanostructured Ti-50.0 at % Ni Alloys
J. ASTM Int. (June 2006) 3 (6): 1–11.
https://doi.org/10.1520/JAI100383
FDA Recommendations for Nitinol Stent and Endovascular Graft Fatigue Characterization and Fracture Reporting
J. ASTM Int. (June 2006) 3 (6): 1–7.
https://doi.org/10.1520/JAI100384
An Evaluation of Aerosol- and Liquid-Generated Silica Samples for Proficiency Analytical Testing
J. ASTM Int. (June 2006) 3 (6): 1–7.
https://doi.org/10.1520/JAI12243
Development of a Fastener Structural Element Test for Certifying Navy Fastener Materials
J. ASTM Int. (June 2006) 3 (6): 1–14.
https://doi.org/10.1520/JAI13067
An Experimental and Numerical Study of the Fracture Strength of Welded Structural Hollow Section X-Joints
J. ASTM Int. (June 2006) 3 (6): 1–14.
https://doi.org/10.1520/JAI13183
Detection of Crack Initiation by Observations of Free Surface Condition
J. ASTM Int. (June 2006) 3 (6): 1–10.
https://doi.org/10.1520/JAI13189
Constraint Corrected J-R- Curve and Its Application to Fracture Assessment for X80 Pipelines
J. ASTM Int. (June 2006) 3 (6): 1–17.
https://doi.org/10.1520/JAI13209
Development of a Circumferentially Throughwall Cracked Tube Specimen for Fatigue Crack Growth Rate Tests
J. ASTM Int. (June 2006) 3 (6): 1–13.
https://doi.org/10.1520/JAI13210
Observations on Photo-Emission and the Process Zone of a Fatigue Crack
J. ASTM Int. (June 2006) 3 (6): 1–9.
https://doi.org/10.1520/JAI13222
Electrokinetic Dewatering and Sedimentation of Dredged Contaminated Sediment
J. ASTM Int. (June 2006) 3 (6): 1–6.
https://doi.org/10.1520/JAI13305
Remediation Technology for Boron and Fluoride Contaminated Sediments Using Green Plants
J. ASTM Int. (June 2006) 3 (6): 1–7.
https://doi.org/10.1520/JAI13306
Electrokinetically Enhanced Settlement and Remediation of Contaminated Sediment
J. ASTM Int. (June 2006) 3 (6): 1–13.
https://doi.org/10.1520/JAI13307
An Investigation of the Heaving Mechanism Related to Chromite Ore Processing Residue
J. ASTM Int. (June 2006) 3 (6): 1–10.
https://doi.org/10.1520/JAI13309
Optical Tests on the Slow Release of Biogenic Gas Bubbles in Sediment
J. ASTM Int. (June 2006) 3 (6): 1–6.
https://doi.org/10.1520/JAI13316
Development of Filtration System for Removal of Contaminated Suspended Solids in an Enclosed Sea Area
J. ASTM Int. (June 2006) 3 (6): 1–10.
https://doi.org/10.1520/JAI13319
A Combined Method: Precipitation and Capping, to Attenuate Eutrophication in Canadian Lakes
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI13321
Permeability Characteristics of Lake Kojima Sediment and Their Improvement
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI13327
Monitoring Heavy Metal Transport in Aquifer Based on Electrical Property Measurements
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI13330
Development of an Acoustical Method for Measuring the Transition Layer of Surficial Marine Sediments
J. ASTM Int. (June 2006) 3 (6): 1–10.
https://doi.org/10.1520/JAI13331
Modeling TPH Desorption in Unconsolidated Dune Sand during Remediation Using Dual-Equilibrium Desorption (DED) Model
J. ASTM Int. (June 2006) 3 (6): 1–7.
https://doi.org/10.1520/JAI13334
Cadmium Transport in Volcanic Ash Soil During Citric Acid Solution Flow
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI13336
Effect of Dispersivity of Filling Material on Performance of Contaminant Barrier
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI13340
Effects of Salt on the Sorption of Lead by Marine Clay in Column Tests
J. ASTM Int. (June 2006) 3 (6): 1–10.
https://doi.org/10.1520/JAI13341
Reactive Material Options for In Situ Capping
J. ASTM Int. (June 2006) 3 (6): 1–6.
https://doi.org/10.1520/JAI13342
Electrokinetic Remediation of Contaminated Dredged Sediment
J. ASTM Int. (June 2006) 3 (6): 1–14.
https://doi.org/10.1520/JAI13344
Groundwater Flow and Arsenic Contamination Analyses in Southern Bangladesh
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI13357
Evaluation of Diamond Detectors for Fast Neutron Fluence Measurements in WWER-1000 Surveillance Assemblies
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI13437
Shielding Calculations for the Upgrade of the HFIR HB 2 Beam Line
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI13462
Residue Analysis on RPVOT Test Samples for Single and Multiple Antioxidants Chemistry for Turbine Lubricants
J. ASTM Int. (June 2006) 3 (6): 1–15.
https://doi.org/10.1520/JAI13508
Spray Retention Models for Arable Crops
J. ASTM Int. (June 2006) 3 (6): 1–10.
https://doi.org/10.1520/JAI13528
Oxygen Fires in Aluminum Alloy Cylinders
J. ASTM Int. (June 2006) 3 (6): 1–7.
https://doi.org/10.1520/JAI13530
Promoted Metals Combustion at Ambient and Elevated Temperatures
J. ASTM Int. (June 2006) 3 (6): 1–11.
https://doi.org/10.1520/JAI13539
Fires in P-3 Aircraft Oxygen Systems
J. ASTM Int. (June 2006) 3 (6): 1–13.
https://doi.org/10.1520/JAI13562
Prediction of Failure in Existing Heart Valve Designs
J. ASTM Int. (June 2006) 3 (6): 1–10.
https://doi.org/10.1520/JAI13581
A Comprehensive Examination of the Internal Angle of Gyration for the Superpave Gyratory Compactor
J. ASTM Int. (June 2006) 3 (6): 1–13.
https://doi.org/10.1520/JAI13639
Tweaking the System: Modifications to the Superpave Mix Design System
J. ASTM Int. (June 2006) 3 (6): 1–8.
https://doi.org/10.1520/JAI13643
Study of Vacuum Carbon-Deoxidization of High Carbon Chromium Bearing Steel
J. ASTM Int. (June 2006) 3 (6): 1–6.
https://doi.org/10.1520/JAI14024
Cleanliness of Bearing Steels and Fatigue Life of Rolling Contacts
J. ASTM Int. (June 2006) 3 (6): 1–6.
https://doi.org/10.1520/JAI14040
New Development in Through Hardened Bearing Steel Grades for Use in Contaminated Lubrication
J. ASTM Int. (June 2006) 3 (6): 1–9.
https://doi.org/10.1520/JAI14045
Evaluation of Methodologies Used for Establishing Soil-Water Characteristic Curve
J. ASTM Int. (June 2006) 3 (6): 1–11.
https://doi.org/10.1520/JAI14084
The Effects of Implant Temperature on Lubricant Protein Precipitation and Polyethylene Wear in Joint Simulation Studies
J. ASTM Int. (June 2006) 3 (6): 1–6.
https://doi.org/10.1520/JAI14178
