Skip Nav Destination
Issues
Research Papers
Dynamic Modulus Testing of Thin Pavement Cores
J. ASTM Int. (April 2006) 3 (4): 1–14.
https://doi.org/10.1520/JAI12258
Microstructure Evolution in ZrC Irradiated with Kr ions
J. ASTM Int. (April 2006) 3 (4): 1–7.
https://doi.org/10.1520/JAI12376
Impact Fracture Behavior of Hollow Glass Bead-Filled ABS Composites
J. ASTM Int. (April 2006) 3 (4): 1–7.
https://doi.org/10.1520/JAI12509
Novel Applications of the Deep-Hole Drilling Technique for Measuring Through-Thickness Residual Stress Distributions
J. ASTM Int. (April 2006) 3 (4): 1–12.
https://doi.org/10.1520/JAI12568
Full-field Laser Shearography Instrumentation for the Detection and Characterization of Fatigue Cracks in Titanium 10-2-3
J. ASTM Int. (April 2006) 3 (4): 1–13.
https://doi.org/10.1520/JAI12757
The Development of Procedures for Charpy Impact Testing
J. ASTM Int. (April 2006) 3 (4): 1–10.
https://doi.org/10.1520/JAI12868
International Standards for Blast Resistant Glazing
J. ASTM Int. (April 2006) 3 (4): 1–16.
https://doi.org/10.1520/JAI12892
Twelve Common Deficiencies Found during Firestopping Inspections
J. ASTM Int. (April 2006) 3 (4): 1–8.
https://doi.org/10.1520/JAI13027
Analysis of Surface Inertial Profiles Measured on Jointed Portland Cement Pavements
J. ASTM Int. (April 2006) 3 (4): 1–12.
https://doi.org/10.1520/JAI13047
Relationship Between Paste Volume and Cementitious Materials Content in Hardened Concrete
J. ASTM Int. (April 2006) 3 (4): 1–9.
https://doi.org/10.1520/JAI13057
Fatigue Strength in Presence of Inhomogeneities: Influence of Constraint
J. ASTM Int. (April 2006) 3 (4): 1–11.
https://doi.org/10.1520/JAI13199
Experimental Evaluation of the J or C* Parameter for a Range of Cracked Geometries
J. ASTM Int. (April 2006) 3 (4): 1–20.
https://doi.org/10.1520/JAI13221
The Role of Applied Potential on Environment-Assisted Cracking of Zirconium Alloys
J. ASTM Int. (April 2006) 3 (4): 1–11.
https://doi.org/10.1520/JAI13231
The Effect of Large Strain Cycling on the Fatigue Strength of Welded Joint
J. ASTM Int. (April 2006) 3 (4): 1–11.
https://doi.org/10.1520/JAI13232
Distribution and Ecology of Dreissena Polymorpha (Pallas) and Dreissena Bugensis (Andrusov) in the Upper Volga Basin
J. ASTM Int. (April 2006) 3 (4): 1–11.
https://doi.org/10.1520/JAI13256
Parameters in Ultrasonic Cleaning for Implants and Other Critical Devices
J. ASTM Int. (April 2006) 3 (4): 1–8.
https://doi.org/10.1520/JAI13387
Reducing Modulus of Sealants to Improve Durability
J. ASTM Int. (April 2006) 3 (4): 1–6.
https://doi.org/10.1520/JAI13415
A Logical Pozzolanic Index and Its Use in Concrete Proportioning
J. ASTM Int. (April 2006) 3 (4): 1–12.
https://doi.org/10.1520/JAI13416
Reactor Dosimetry Issues During Justification of Extension of Service Life of Nonrestorable Equipment of Russian VVER
J. ASTM Int. (April 2006) 3 (4): 1–8.
https://doi.org/10.1520/JAI13441
Deterministic and Monte Carlo Neutron Transport Calculation for Greifswald-1 and Comparison with Ex-vessel Measured Data
J. ASTM Int. (April 2006) 3 (4): 1–7.
https://doi.org/10.1520/JAI13460
Sensitivity Analysis and Neutron Fluence Adjustment for VVER-440 RPV
J. ASTM Int. (April 2006) 3 (4): 1–7.
https://doi.org/10.1520/JAI13489
Oxidation Fundamentals and Its Application to Turbine Oil Testing
J. ASTM Int. (April 2006) 3 (4): 1–20.
https://doi.org/10.1520/JAI13498
Mechanical Characterization of Cryogenically Treated Music Wire
J. ASTM Int. (April 2006) 3 (4): 1–16.
https://doi.org/10.1520/JAI13510
Promoted Ignition of a Cylinder Valve in NF3
J. ASTM Int. (April 2006) 3 (4): 1–8.
https://doi.org/10.1520/JAI13535
Filtration of Gaseous or Liquid Oxygen in Industrial Applications and Associated Fire Risks
J. ASTM Int. (April 2006) 3 (4): 1–13.
https://doi.org/10.1520/JAI13537
Review, Analysis, and Hazard Mitigation of the Life-Support Oxygen System on Royal Australian Air Force P-3 Orion Aircraft
J. ASTM Int. (April 2006) 3 (4): 1–13.
https://doi.org/10.1520/JAI13544
Effect of Sample Geometry on Regression Rate of the Melting Interface for Carbon Steel Burned in Oxygen
J. ASTM Int. (April 2006) 3 (4): 1–9.
https://doi.org/10.1520/JAI13565
An Investigation of Regression Rate of the Melting Interface for Iron Burning in Normal Gravity and Reduced Gravity
J. ASTM Int. (April 2006) 3 (4): 1–12.
https://doi.org/10.1520/JAI13569
The Adiabatic Compression Test for Type Approval of Components — History and Final Test Protocol
J. ASTM Int. (April 2006) 3 (4): 1–9.
https://doi.org/10.1520/JAI13571
The Oxygen Index of Surgical Drape Materials
J. ASTM Int. (April 2006) 3 (4): 1–5.
https://doi.org/10.1520/JAI13574
A Thermal Analysis Method for Measuring Polymer Flammability
J. ASTM Int. (April 2006) 3 (4): 1–18.
https://doi.org/10.1520/JAI13895
A Statistical Method to Assess the Reliability of Cleanness Measurements for High Quality Bearing Steels
J. ASTM Int. (April 2006) 3 (4): 1–10.
https://doi.org/10.1520/JAI14032
Performance Evaluation of “Duplex Hardened” Bearings for Advanced Turbine Engine Applications
J. ASTM Int. (April 2006) 3 (4): 1–9.
https://doi.org/10.1520/JAI14049
Surface Texture Analysis of Artificial Disks Wear-Tested under Different Conditions and Comparison to a Retrieved Implant
J. ASTM Int. (April 2006) 3 (4): 1–8.
https://doi.org/10.1520/JAI14173
Head Injury in Snowboarding: Evaluating the Protective Role of Helmets
J. ASTM Int. (April 2006) 3 (4): 1–9.
https://doi.org/10.1520/JAI14203
