Skip Nav Destination
Issues
Research Papers
A Numerical Method for the Recovery of Local Potentials and Currents Due to Corrosion of Steel in Concrete
J. ASTM Int. (February 2006) 3 (2): 1–11.
https://doi.org/10.1520/JAI11788
Service Life Extension of Virginia Bridge Decks Afforded by Epoxy-Coated Reinforcement
J. ASTM Int. (February 2006) 3 (2): 1–13.
https://doi.org/10.1520/JAI11793
Use of Electrochemical Techniques to Assess Performance of Corrosion Protection Systems for Reinforced Concrete Structures—A Review
J. ASTM Int. (February 2006) 3 (2): 1–12.
https://doi.org/10.1520/JAI11797
Low Strain-Rate Microstructural Deformation Behavior in 316 Stainless Steel Irradiated in EBR-II
J. ASTM Int. (February 2006) 3 (2): 1–9.
https://doi.org/10.1520/JAI12400
Mechanical Property Changes in Reactor Vessel Materials Thermally Aged for 209 000 H at 260°C
J. ASTM Int. (February 2006) 3 (2): 1–9.
https://doi.org/10.1520/JAI12430
Use of Broken Charpy V-notch Specimens from a Surveillance Program for Fracture Toughness Determination
J. ASTM Int. (February 2006) 3 (2): 1–7.
https://doi.org/10.1520/JAI12450
The Effect of Joint Condition on Mechanical Properties of Irradiated Hot Isostatic Pressed Joints
J. ASTM Int. (February 2006) 3 (2): 1–7.
https://doi.org/10.1520/JAI12482
An Integrated Approach to the Determination and Consequences of Residual Stress on the Fatigue Performance of Welded Aircraft Structures
J. ASTM Int. (February 2006) 3 (2): 1–17.
https://doi.org/10.1520/JAI12547
Smoke Toxicity Data for Fire Hazard and Risk Assessment of Cable Products
J. ASTM Int. (February 2006) 3 (2): 1–5.
https://doi.org/10.1520/JAI12852
The History of Instrumented Impact Testing
J. ASTM Int. (February 2006) 3 (2): 1–9.
https://doi.org/10.1520/JAI12867
International Comparison of Impact Reference Materials (2004)
J. ASTM Int. (February 2006) 3 (2): 1–9.
https://doi.org/10.1520/JAI12869
Development of a Dry Applied Dispersible Granular Pesticide Carrier
J. ASTM Int. (February 2006) 3 (2): 1–5.
https://doi.org/10.1520/JAI12909
Relationship Between Indentation Hardness and Water to Cement Ratio of Hardened Mortar and Concrete
J. ASTM Int. (February 2006) 3 (2): 1–7.
https://doi.org/10.1520/JAI13060
Standards Development for Impermeable, Constructible, and Durable Waterproofing
J. ASTM Int. (February 2006) 3 (2): 1–19.
https://doi.org/10.1520/JAI13117
Simulation on the Decrease in Threshold Stress Intensity Factor (SIF) Range due to High Maximum SIF
J. ASTM Int. (February 2006) 3 (2): 1–10.
https://doi.org/10.1520/JAI13195
Analysis of Creep Crack Initiation and Growth in Different Geometries for 316H and Carbon Manganese Steels
J. ASTM Int. (February 2006) 3 (2): 1–20.
https://doi.org/10.1520/JAI13220
European Code of Practice for Creep Crack Initiation and Growth Testing of Industrially Relevant Specimens
J. ASTM Int. (February 2006) 3 (2): 1–20.
https://doi.org/10.1520/JAI13223
Prediction of Scatter in Creep Crack Growth Data from Creep Failure Strain Properties
J. ASTM Int. (February 2006) 3 (2): 1–13.
https://doi.org/10.1520/JAI13227
Trends in High Temperature Structural Integrity Assessment
J. ASTM Int. (February 2006) 3 (2): 1–18.
https://doi.org/10.1520/JAI13229
Methodology for Determination of Hygroscopic Moisture Content of Soils
J. ASTM Int. (February 2006) 3 (2): 1–14.
https://doi.org/10.1520/JAI13376
ASTM Activities for Assessing Cleanliness of Medical Devices
J. ASTM Int. (February 2006) 3 (2): 1–4.
https://doi.org/10.1520/JAI13389
Cleanliness Testing and Identification of Residues on Polymer Medical Devices
J. ASTM Int. (February 2006) 3 (2): 1–9.
https://doi.org/10.1520/JAI13391
Reactor Dosimetry with Niobium
J. ASTM Int. (February 2006) 3 (2): 1–8.
https://doi.org/10.1520/JAI13439
Gas Production in Reactor Materials
J. ASTM Int. (February 2006) 3 (2): 1–6.
https://doi.org/10.1520/JAI13485
The Case for a Voluntary National Healthcare Identifier
J. ASTM Int. (February 2006) 3 (2): 1–12.
https://doi.org/10.1520/JAI13891
The Challenge of Multiple Particles in Extreme Value Inclusion Rating
J. ASTM Int. (February 2006) 3 (2): 1–8.
https://doi.org/10.1520/JAI14041
A Novel Method to Evaluate the Influence of Hydrogen on Fatigue Properties of High Strength Steels
J. ASTM Int. (February 2006) 3 (2): 1–13.
https://doi.org/10.1520/JAI14048
Comparison of Fatigue Performances of 32CrMoV13 and M50 Steels in Presence of Surface Indents
J. ASTM Int. (February 2006) 3 (2): 1–11.
https://doi.org/10.1520/JAI14051
Continued Developments in Easily Carburizable High Speed Steel Alloys
J. ASTM Int. (February 2006) 3 (2): 1–9.
https://doi.org/10.1520/JAI14052
Characterization of Wear and Surface Reaction Layer Formation on Aerospace Bearing Steel M50 and a Nitrogen-alloyed Stainless Steel
J. ASTM Int. (February 2006) 3 (2): 1–10.
https://doi.org/10.1520/JAI14055
Radioactivity Inspections Applied to the Steelmaking Industry
J. ASTM Int. (February 2006) 3 (2): 1–6.
https://doi.org/10.1520/JAI14106
Reduce the Injuries, Change the Culture: Insights from Telemarking
J. ASTM Int. (February 2006) 3 (2): 1–9.
https://doi.org/10.1520/JAI14138
