Skip Nav Destination
Issues
Research Papers
Effects of Patient and Surgical Alignment Variables on Kinematics in TKR Simulation Under Force-Control
J. ASTM Int. (November 2006) 3 (10): 1–14.
https://doi.org/10.1520/JAI100248
Determination of Equilibrium Moisture Content of Building Materials: Some Practical Difficulties
J. ASTM Int. (November 2006) 3 (10): 1–9.
https://doi.org/10.1520/JAI100265
New Approaches in Investigation of Removal Mechanisms during Copper Chemical-Mechanical Polishing
J. ASTM Int. (November 2006) 3 (10): 1–7.
https://doi.org/10.1520/JAI100287
Effect of Entrained Air on Recycled Concrete Prasoperties
J. ASTM Int. (November 2006) 3 (10): 1–7.
https://doi.org/10.1520/JAI100289
Prediction of Texture in Cold Flat Rolling of Aluminum Using an Explicit Dynamic Finite Element Model
J. ASTM Int. (November 2006) 3 (10): 1–14.
https://doi.org/10.1520/JAI100296
Coolants at Elevated Temperatures
J. ASTM Int. (November 2006) 3 (10): 1–10.
https://doi.org/10.1520/JAI100325
Analysis of the VENUS-3 PWR Pressure Vessel Surveillance Benchmark Using TRIPOLI-4.3 Monte Carlo Code
J. ASTM Int. (November 2006) 3 (10): 1–9.
https://doi.org/10.1520/JAI100338
An Approach to Determining the Uncertainty in Reactor Test Objects Using Deterministic and Monte Carlo Methods
J. ASTM Int. (November 2006) 3 (10): 1–13.
https://doi.org/10.1520/JAI100345
Measurement and Calculation of WWER-440 Pressure Vessel Templates Activity for Support of Vessel Dosimetry
J. ASTM Int. (November 2006) 3 (10): 1–10.
https://doi.org/10.1520/JAI100365
Development of a Silicon Calorimeter for Dosimetry Applications in a Water-Moderated Reactor
J. ASTM Int. (November 2006) 3 (10): 1–9.
https://doi.org/10.1520/JAI100380
Influence of the Multigroup Approximation on VVER-1000 RPV Neutron/Gamma Flux Calculation
J. ASTM Int. (November 2006) 3 (10): 1–6.
https://doi.org/10.1520/JAI100381
Impact of Small Chemistry Variations in Plate and Weld Filler Metal on the Corrosion Performance of Ni-Cr-Mo Alloys2
J. ASTM Int. (November 2006) 3 (10): 1–13.
https://doi.org/10.1520/JAI100401
Seismic Performance of Two-Side Structural Silicone Glazing Systems
J. ASTM Int. (November 2006) 3 (10): 1–10.
https://doi.org/10.1520/JAI100407
Are Multiaxial Fatigue Criteria Appropriate When Steels with Surface Defects are Subjected to Rolling Contact Fatigue
J. ASTM Int. (November 2006) 3 (10): 1–7.
https://doi.org/10.1520/JAI100416
Characteristics of Vanadium Alloyed Carbonitrided Steel for Rolling Bearing Applications
J. ASTM Int. (November 2006) 3 (10): 1–13.
https://doi.org/10.1520/JAI100422
Electrical and Mechanical Properties of Conducive Carbon Black/Polyolefin Composites Mixed With Carbon Fiber
J. ASTM Int. (November 2006) 3 (10): 1–8.
https://doi.org/10.1520/JAI100431
Evaluation of the Chinese Accelerated Test for Alkali-Carbonate Reaction
J. ASTM Int. (November 2006) 3 (10): 1–10.
https://doi.org/10.1520/JAI100433
Investigation into the Effects of Materials and Mixing Procedures on Air Void Characteristics of Fresh Concrete Using Air Void Analyzer (AVA)
J. ASTM Int. (November 2006) 3 (10): 1–15.
https://doi.org/10.1520/JAI100435
Utilization of Discarded Fly Ash as a Raw Material in the Production of Portland Cement
J. ASTM Int. (November 2006) 3 (10): 1–14.
https://doi.org/10.1520/JAI100449
New Durable Sealant of Telechelic Polyacrylate
J. ASTM Int. (November 2006) 3 (10): 1–9.
https://doi.org/10.1520/JAI100450
Effect of Fluoride on Corrosion of Cooling System Metals in Ethylene Glycol-Based Antifreeze/Coolants
J. ASTM Int. (November 2006) 3 (10): 1–10.
https://doi.org/10.1520/JAI100505
Hertzian Fracture, Kinetic Friction and the Mechanical Impact LOX Compatibility Testing of Polymers and Polymer Matrix Composites
J. ASTM Int. (November 2006) 3 (10): 1–33.
https://doi.org/10.1520/JAI100549
A Comparison of Predictions From Probabilistic Crack Growth Models Inferred From Virkler's Data
J. ASTM Int. (November 2006) 3 (10): 1–11.
https://doi.org/10.1520/JAI100574
A New Concept for Leak Testing Environmental Enclosure Filtration Systems
J. ASTM Int. (November 2006) 3 (10): 1–11.
https://doi.org/10.1520/JAI100618
New Synthesis Method and Mechanical Properties of Magnesium Matrix Composites
J. ASTM Int. (November 2006) 3 (10): 1–5.
https://doi.org/10.1520/JAI13036
A Review of Swedish Bearing Steel Manufacturing and Quality Assurance of Steel Products
J. ASTM Int. (November 2006) 3 (10): 1–13.
https://doi.org/10.1520/JAI14022
